Welcome back! If you missed Day 1, check it out here.  Yesterday we did all the prep work, and today we’ll do what I call “the fussy work,” leaving the assembly of the bag for tomorrow. A note about this sew-along: the pattern is written wonderfully, so feel free to refer to it as we go along. Let’s get sewing!

The pattern gives directions to make the strap by turning a tube and topstitching, but I prefer a method I learned in a different Noodlehead pattern. I’m going to use the size of the straps already stated in the pattern, but feel free to alter your strap size. I use 2 different fabrics for each strap. I start by placing one set of straps right sides together and sewing along the long edge. Then press seam to one side, and fold and press each long raw edge into center crease, then bring folded edges together. Topstitch along long edge where folds meet, then topstitch along other long edge. Repeat with remaining set of straps. Set aside.

As mentioned in Day 1, I like my pockets to be fully lined. I’ll start by inserting a magnetic snap into the lining of my pocket. I folded my pocket in half to find the center, then marked a dot 2″ from the top raw edge of the pocket lining to mark my snap. I like to use my seam ripper to cut the slots for my magnetic snap; just go slowly when you’re cutting, making sure the hole isn’t too big. I also used a scrap of stabilizer on the wrong side of my pocket lining to help secure my snap and make sure it doesn’t rip through the fabric when being used. I added the male half to the pocket and will add the female half to the front of the bag later. 

If you want to add piping to the pocket, add it now, by matching the raw edges of the piping to the top raw edge on the right side of the pocket front. If you’ve never tried piping before, this is a great time to give it a go! It’s just one straight line, so as far as piping goes, it doesn’t get any easier than this. Place the pocket front and lining pieces right sides together and sew along the top (as close to the piping as you can if you added it). Turn right sides out, press and topstitch.  Set aside.

Since my interior pockets are fully lined, I start by sewing both pieces right sides together, turning, pressing and topstitching. Then I add another row of stitching 1/2″ away from the previous toptstitch, to create a casing for my elastic. Feed the elastic through, secure with zigzag stitch on both ends. Baste bottom of pocket pieces together and gather until the pocket is the same width as the lining pattern piece B. Baste pocket to lining along side and bottom. Sew vertical line in center of pocket as divider. Repeat with remaining pocket pieces and elastic.

This part is optional, but I highly recommend it. I think zippers give bags a much more finished look. Take your recessed zipper panel and fold in all edges 1/4″, wrong sides facing. I use my metal gauge for this step – just make sure you don’t touch it, because the iron heats it up pretty quickly! Once all your sides are folded in, fold the piece in half lengthwise (like a hotdog) and press again. Now open up one crease on a long edge and match the raw edge to  one long edge of the underside of your zipper tape, pin or clip, then sew along crease. Now flip zipper over and fold panel back, then topstitch along short sides and long side closest to zipper, leaving folded edge unstitched. Repeat with remaining panel and other side of zipper. I will be adding metal zipper tabs to my bag as the final step, but if you’re using fabric tabs, add them now as directed in pattern.

Place straps on Exterior B centered and 4.5″ apart, then pin in place. Then place Exterior A right sides together on Exterior B, matching long raw edge of A with top raw edge of B. Sew in place, securing straps as well. Lift Exterior A, press seam allowance down and top stitch along top of Exterior B. See diagram in pattern for stitching placement to further secure straps. Repeat above for remaining Exterior A, B and strap. Baste assembled pocket onto front Exterior A/B assembly along sides and bottom (curve) of pocket. At this point, you can find the perfect placement for the other half the magnetic snap, and install it, again using a piece of scrap stabilizer on the wrong side of the bag front.

That’s plenty for today. Come back tomorrow when we’ll complete the bag! 

I’m so glad you’ve decided to join me in making a Noodlehead Super Tote! If you don’t have the pattern yet, you can use discount code STSAL to save 20% from Noodlehead (discount good until August 31 2015). If you prefer paper patterns, you can also purchase one at Fabric Spark. If you still need some fabric inspiration, or planning your next one, you can use code HAPPY15 to get 15% off all Linen and Canvas fabrics at Fabric Spark (code valid until July 31, 2015).

I’ll break the Sew-along up over 3 days:

• Day 1(that’s today!)- Planning, cutting, and fusing
• Day 2 – Straps, pockets and zipper
• Day 3 – Assembling the bag

Let’s get started!  If you’ve purchased the PDF, print it out, cut the pieces and tape together where indicated.  Before we get to cutting fabric, we need to plan out the bag. I like to go through my pieces to write out a list of what I need to cut and then decide which fabrics I’ll use for them, or you can just follow the pattern’s suggestions (each piece specifies what to cut). Don’t mind my messy hand writing!

I also like my bags a bit firmer, so I’m not following the interfacing suggestions exactly. For my last Super Tote, I used quilting cottons, so I used Pellon Craft Fuse 808 and Fusible Fleece on my lining pieces and Pellon Shape Flex 101 on my exterior. This time around, my bag is mainly canvas, as the pattern calls for, so I decided on Craft Fuse for the lining and Shape Flex for the exterior. 

Extra: I like all my pockets to be fully lined, so I cut a second front pocket, and 2 extra interior pockets in a coordinating solid. This sew-along will have instructions to make the bag with these pocket linings.

Once you’ve decided which fabrics are going where, it’s time to start cutting! 

Tip: I find it faster to cut my interfacing first, then fuse it to my fabric and then cut out the fabric. I’ve also heard of others fusing large pieces of interfacing to fabric, and then they only need to trace and cut once – if you got your interfacing on sale, that might be a really good option. 

I also clip my pattern piece to my cut out pieces as I go, so I don’t lose track of what my pieces are. Sometimes I just write on the interfacing with a Frixion marker. 
I cross the pieces off my list once I’ve cut them; it helps me keep track and makes me feel better about the least favourite part of bag making (cutting and fusing).

Once you’ve cut and fused everything, place it in a nice pretty pile, and we’ll see you back here tomorrow to start sewing. 

Sale of the week: 15% off all licensed cottons & flannels with the code tv15



http://funkymonkeyfabrics.com/cotton-fab…/licensed-cottons/…

http://funkymonkeyfabrics.com/flannel-fabrics/licensed/

Stay Home Fabrics is having a preorder for Kam Snaps. It’s a great deal and includes everything you need to get started snapping. Check out the event page here for more details.

Not a sale, but so many amazing giveaways for Thread Riding Hood’s 3 year blogiversary.
Check out all the giveaways here. 

This is the second large Companion Carpet Bag I’ve made and I still love this pattern! It sews up quite quickly, but the finished result is an impressive one. The defining feature of this bag is its unique metal frame. The foam stabilizer (I used Pellon Flex-Foam) supports the weight of the frame nicely.

Don’t let the frame scare you though! It’s easier than it looks, and I’ve even made a quick video showing you how.

I’ve mentioned before that I like to check out thrift stores for the perfect purse parts, and this bag was a result of a lucky find. I happened upon a bag in really good condition with these gorgeous handles. The bag wasn’t my style, but the handles caught my eye.I was also able to rip-stitch the strapping on the bag for enough material to create my own connectors. 

For this bag I chose Tula Pink, Elizabeth, from Fabric Spark and Tangled Blossoms Design on Etsy, both great Canadian shops. The frame came from Emmaline Bags, another wonderful Canadian shop. Or check out Bobbin Girl if you’re in the UK. 

You can get the pattern for the Companion Carpet Bag from Sewing Patterns by Mrs. H here.

I had an opportunity to test another pattern for Sara at Sew Sweetness, and this time, it’s not a bag! It’s called the Creative Maker Supply Case, and, as the name implies, it’s a case to hold supplies. The pattern comes in 3 sizes. This one is the large and it’s about the size of a binder, large enough to hold a full sized notebook. I’m also working on a couple small cases, and they’re great for crayons and a small colouring pad, plus a few craft supplies. 

The pattern comes with directions for elastic slots on one half, to hold markers or pencils. The other half has a mesh pocket and a fabric pocket. The whole thing zips up to keep all your contents safe inside. You can really do whatever you want inside though, which is what makes this such a great pattern. If you want one side to be half pens and half thicker markers, then you can adjust the elastic slots. Or maybe you want pockets on both sides. The possibilities are endless really.  

I’ve had this Jungle Ave. fabric by Sara Lawson for Art Gallery from Satin Moon Quilted Garden for a while now, and I wanted to save it for one of Sara’s patterns. I thought this was the perfect project to showcase it. I also used her Big City Aurifil Thread Collection to match the fabric perfectly. Does anyone else think it’s super cool to use a designer’s fabric for their patterns, or am I just a sewing nerd? Nevermind, I already know the answer to that question 😉
 I made the zipper with double pulls following the method I explained in my zipper post, here. I followed the interfacing suggestions in the pattern and used all Pellon interfacing.

It’s a nice and quick project. I found the elastics a bit tedious, but certainly not difficult. I’ll admit the zipper was a bit tricky at the spine of the case, and for that reason, I’d consider this to be an intermediate sewing level project. Don’t let that scare you though! It’s definitely worth it!

I see so many uses for this pattern: kids colouring case for trips, sewing project case, teacher’s supplies, you name it! I saw someone suggest it would be good for diabetic supplies or other medical equipment, and I think that’s certainly a possibility with some easy personalization inside the case.

Here’s a sneak peek at my next ones:

The pattern is now available from Sew Sweetness, you can find it here. 

I’d love to hear what you think. What will you do with yours? Let me know in the comments.

Save 25% until July 14 with code BACKTOSCHOOL on Diedelbug Handmade patterns here. 

Know some more sales? send me an email or leave details in the comments

I’m so excited to announce my next Sew-along! This time, I hope you’ll join me in making a Noodlhead Super Tote. If you’re not familiar with the Super Tote, you’re in for a treat! This is a gusseted tote with a roomy exterior pocket and a recessed zippered closure. Inside are large slip pockets. This tote is so great for a day of errands, a walk around town, or a carryall for busy moms.  Mark your calendars: We’ll start on July 17, for a weekend of sewing. Similar to my last SAL, I have some discounts to share with you, and a prize! 

Discounts:
Anna from Noodlehead has generously set up a coupon code for my readers to save 20% off the Super Tote pattern. Use code STSAL, valid until August 31, 2015.

Daryl from Fabric Spark has also generously agreed to extend a discount to my readers, and I think you’ll agree it’s the perfect discount for this pattern: Save 15% off all Linen/Canvas fabrics, with code Happy15 until July 31, 2015

Prize:
I will randomly select a participant who completes their Super Tote to win any 2 Noodlehead PDF patterns. Entries must be in by August 5. 2015. See below for details.

I will be using Anna’s Rain Walk collection from Cloud 9 for my Super Tote. I can’t wait to dig into this gorgeous fabric!

What do you now? If you don’t have the pattern, you can purchase the PDF here (don’t forget to use code STSAL to save 15%) or the paper pattern from Fabric Spark here. Next, you’ll need to select your fabrics. Refer to the pattern for requirements. Note: depending on the fabric types you choose and your personal preferences, you may wish to add fusible fleece and Pellon Craft Fuse to your interfacing. Check my Canadian Sewing Links tab for great sources in Canada.

I really love following everyone’s progress so please use #HappyOkapiSTSAL on Facebook and Instagram when you post about it so we can all see what you’re up to.

How To Win

• Post a picture of your completed Super Tote on Facebook using #HappyOkapiSTSAL, make sure the post is public so I can see it; it can be on your business page or personal page

• Post a picture of your completed Super Tote on Instagram using #HappyOkapiSTSAL, make sure the post is public so I can see it

• Email me a picture of your completed Super Tote

• Post a link of a picture of your completed Super Tote in the comments of the DAY 3 blog post

 I’ll see you back here on July 17th! There is no official signup, but I’d love to hear from you if you plan on joining. Leave me a comment letting me know.